The conductivity sensor is a unique flow-through self-flushed cell with seven platinum ring electr
odes. The c
entral ring is excited with alternate current flowing to both the outermost rings. The Conductivity Sensor is mounted in a special cylindrical plastic body, which guarantees thermic insulation and is filled.
The conductivity sensor is a unique flow-through self-flushed cell with seven platinum ring electrodes. The central ring is excited with alternate current flowing to both the outermost rings. The Conductivity Sensor is mounted in a special cylindrical plastic body, which guarantees thermic insulation and is filled with silicone oil and provided with a rubber bellow to achieve pressure compensation. IDRONAUT produce and sells different Conductivity Sensors able to withstand to 5, 150 or 70
The IDRONAUT Conductivity sensors have the advantage that, they can be used in both clean and dirty water without the fear of contamination. Should electrode contamination occur, they can be easily cleaned (even with up to 30% hydrochloric acid) without affecting the probe performance or requiring re-calibration. Because of its big internal diameter and short length, the cell does not need a pump, as it is easily flushed during profiles.
with silicone oil and provided with a rubber bellow to achieve pressure compensation. IDRONAUT produce an
d sells different Conductivity Sensors able to withstand to 5, 150 or 700 bar.
The IDRONAUT Conductivity sensors have the advantage that, they can be used in both clean and dirty water without the fear of contamination. Should electrode contamination occur, they can be easily cleaned (even with up to 30% hydrochloric acid) without affecting the probe performance or requiring re-calibration. Because of its big internal diameter and short length, the cell does not need a pump, as it is easily flushed during profiles.
Conductivity sensors measure how well a solution conducts a current. The more ions that are in the solution, the higher the conductivity.
Several types of conductivity sensors are available to meet your process conductivity measuring requirements.
The sensors output is 4-20 mA with a three wire configuration. All conductivity sensors have their electronics completely encapsulated in marine grade epoxy within a stainless steel housing .
0 bar.
